 |
|
 |
|
 |
 |
|
The Difference is Simplicity! Simple, quick-change
tine replacement!
|
|
No
more clumsy tooth /clip /bolt combinations to repair.
Each double tine requires just one bolt. A double center
hub and a larger outer hoop also increase tine support.
|
|
Standard on WRX & WR-V Rakes or as Replacement Wheels.
|
|
The
DuraBull™ rake wheel can be installed
on most wheel rakes on the market today. Incorporate
this rake wheel to improve performance, reliability
and reduce maintenance. The new rugged, heavy-gauge
camber-style twin raking teeth are much stronger
and last longer than today’s single-tooth
designs.
Tackles
Tough Terrain. Traditional wheels tend to
bounce over or even skip some crop. The DuraBull™
rakes clean in these rugged, uneven conditions.
Heavy Crop, No Problem.
High volumes of hay, such as the first cutting,
are handled with ease by the DuraBull™ rake
wheel.
Moisture
is No Longer an Issue. Traditional rake wheels
can have a difficult time with higher moisture crops.
The DuraBull™ rake wheel's rugged construction
and aggressive tines provide longer life and clean
raking.
Heavy
Duty Construction for Superior Results. Each
DuraBull™wheel is constructed with a double
center hub and larger outer rim for increased support.
DuraBull™ tines boast 7 mm with a camber bend
in contrast to traditional 5 – 6 mm tines
with sharp bends. DuraBull™ Rake Wheels are
optional on the Vermeer WRX12, WRX14, WRX16, and WRX18/20 Wheel Rakes.
As well as the Rebel WR220, WR20/22/24 Wheel Rakes. The
DuraBull wheel is standard on Vermeer WRV8 and V10 Wheel Rakes.
Eliminate difficult
repairs. DuraBull™ tines, sandwiched
between 2 centerhubs held with one bolt for each
double tine, make for quick and easy replacement.
Compare with conventional wheels which have single
teeth, clips and bolts to assemble.
Adapts to Fit Your Specific Needs.
- Replace the complete wheel by bolting directly
to your existing arm hub.
- With a repair kit, which includes 20 double
DuraBull™ tines and a new outer hoop,
you still utilize the existing center hub and
hardware.
- DuraBull™ wheels are made to fit both
left and right side.
- Try replacing two of your existing wheels
and compare!
- The rake wheel’s interchangeability
allows it to also fit on competitive brands
of equipment including Tonutti, John Deere,
Gehl, Sitrex, M&W, New Holland, Lely, Case
IH, John Day, H&S, White/New Idea, Hesston
and Enrossi.
Put Some Teeth Into Your Wheel Rake! Get them
at your local Vermeer dealer.
|
Find the Vermeer Dealer Near You
|
|
